V75 Blower Type Vacuum Unit

This containerized skid is designed and built to operate in high risk locations, in particularly Potentially Explosive Atmospheres Category 2G and is entitled to hold the ATEX Mark.

The unit is capable of working at full capacity in ambient temperatures from –20° C to 30° C. The skid frame is designed and approved according to DNV 2.7-1. The complete unit is DNV approved according to NORSOK Z-015, ATEX and the unit carries the CE mark.

Technical description

  • Prime mover: 75 kW electrical motor
  • Blower: Dresser Roots RAM-DVJ 616
  • Control system: Electrical
  • Inlet vacuum: 600 mbar (25 INHG)
  • Sound pressure level (SPL): 74 dBa, Test method ISO 3746-1995 (E)

Designed according to European Directive Compliance Listing

  • 94/9/EC (ATEX)
  • 98/37/EEC, Machinery Directive
  • 89/336/EEC, EMC Directive
  • 76/117EEC&79/196/EEC, EX Directive
  • DNV 2.7-1, Offshore containers
  • NORSOK Z-015, Temporary equipment


  • Interface:
  • Air: n.a
  • Electrical power: Multivoltage 400-690V, 50-60Hz
  • Suction connection: 6” Camlock
  • Discharge connection: n.a

Weight and dimensions

  • Weight MGW: 8.000kg
  • Weight (operational): 6.500kg
  • Total length: 3395 mm
  • Total width: 1895 mm
  • Total height: 2189 mm
  • Units are designed to be stacked in height during storage and operation with use of ISO locks.

Drop Tank

  • L: 1570mm x W: 1280mm x H: 1760 mm
  • Weight: 0,6 Tons

V75 Blower Type Vacuum Unit key features ...

Different solutions for drill cuttings transport, pit tank cleaning, and general rig cleaning.
It can convey cuttings at rates of up to 30 tonnes per hour.

Get in touch

Do you want to know more about the possibilities? Or do you want a quick quote? Call (+47) 51 71 53 80 or send an email to post@ots.as.

Related products
Vakuum unit, small liquid ring type. for low energy usage and very effective in operation. Small footpring for ease of placement. Used on various type cleaning operations such as waste water, oily sludges, slop water, mud types, drain cleaning and more.
Our liquid ring vacuum units are ideal for all types of cleaning and fluid transfer purposes. All units can be built to each customer´s specifications.
In extension of our well recommended vacuum fleet, our newest design has more than four times the volume of suction, per pump, which gives the power needed to transport heavy waste over long distances.
The Solidsvac SV70-SPDK is designed to reliably handle any flowable sludge and slurry and is ideally suited where submersible, centrifugal and diaphragm pumps are not a viable option.