Skip Filling Station

Skip filling station for effective filling of drilling waste in to mud skips.

Home
Products
Skip Filling Station

The OTS Skip Filling Station is designed to receive drilling
waste from a transfer system safely and efficiently. This
is achieved by the use of for example a pneumatic transfer system. Drilling waste is fed into
the air blower and transported to a designated area on the rig where the skip filling station will be placed.
The waste is then offloaded to the skip by means of a manifold arrangement – skip filling station.
The system can be custom built and have bay’s for several mud skips.

Product photos

Downloads

General Sales & Rental Conditions

Get in touch

Do you want to know more about the possibilities? Or do you want a quick quote? Call (+47) 51 71 53 80 or send an email to post@ots.as.

Waste Water Treatment Unit

System processes oil-contaminated brines, seawater, surfactants, freshwater, and surface-generated water. Mechanical separation generates dried solids, oil, and water waste streams.

Well Service Equipment

We are a complete supplier of high pressure pumping equipment for offshore well intervention and well service pumping operations.

Vakuum unit, small liquid ring type

Vakuum unit, small liquid ring type. for low energy usage and very effective in operation. Small footpring for ease of placement. Used on various type cleaning operations such as waste water, oily sludges, slop water, mud types, drain cleaning and more.

Vacuum Units (Liquid Ring Type)

Our liquid ring vacuum units are ideal for all types of cleaning and fluid transfer purposes. All units can be built to each customer´s specifications.

Twin vacuum unit

In extension of our well recommended vacuum fleet, our newest design has more than four times the volume of suction, per pump, which gives the power needed to transport heavy waste over long distances.

V75 Blower Type Vacuum Unit

This containerized skid is designed and built to operate in high risk locations, in particularly Potentially Explosive Atmospheres Category 2G and is entitled to hold the ATEX Mark.

SV70-SPDK Vacuum Loading Solids Pump

The Solidsvac SV70-SPDK is designed to reliably handle any flowable sludge and slurry and is ideally suited where submersible, centrifugal and diaphragm pumps are not a viable option.

SRS – Swarf Removal System

The Swarf Removal System (SRS) is designed to remove metal swarf, large pieces of cement, pieces of casing, and other debris from the circulating fluid during casing milling operations.

Flowline magnet assembly

The Magnet Swarf Removal System is designed to remove metal swarf from the circulating fluid during casing-milling operations when milling short length, typical under 60 meters

Closed Mud Skips

New design in order to meet the market requirements

Mud cooler

The patented offshore mudcooler is one of the world class mudcoolers developed by Task Environmental Services for the oil and gas industry.

Cuttings Blower unit

OTT pneumatic cuttings transport system is ideal for transporting drilled cuttings from shaker trough to skip loading station, directly into closed mud skips.

Triple Diaphragm Pump Skid

Low Pressure Pumps

Low pressure pump for fluid handling

Filterunit

Offshore Technical Services has a wide range of rental filter units. The units are manufactured from stainless steel, and can be used during slop treatment and filtration of slop or other contaminated fluids.

Combi Bag and Cartridge Unit

Specially designed unit for treatment of small volume of contaminated fluid offshore or onshore.

Environment skid

Environment skid for small volume contaminated fluids

Storage Tanks

OTS AS design and build storage tanks in different sizes.

Treatment Plant

To prevent pollution and save the environment our company have installed a system to clean all waste water produced by cleaning off our rental equipment.

Chemical Treatment Package

Special designed unit for filtration of small amount of chemicals and hydraulic oil reservoir, fuel tanks etc.